THS10082
具有双通道、并行 DSP/uP 接口、16X FIFO、通道自动扫描、低功耗的 10 位 8MSPS ADC
制造商:TI
产品信息
描述The THS10082 is a CMOS, low-power, 10-bit, 8 MSPS analog-to-digital converter (ADC). The speed, resolution, bandwidth, and single-supply operation are suited for applications in radar, imaging, high-speed acquisition, and communications. A multistage pipelined architecture with output error correction logic provides for no missing codes over the full operating temperature range. Internal control registers allow for programming the ADC into the desired mode. The THS10082 consists of two analog inputs, which are sampled simultaneously. These inputs can be selected individually and configured to single-ended or differential inputs. An integrated 16 word deep FIFO allows the storage of data in order to take the load off of the processor connected to the ADC. Internal reference voltages for the ADC (1.5 V and 3.5 V) are provided. An external reference can also be chosen to suit the dc accuracy and temperature drift requirements of the application. Two different conversion modes can be selected. In the single conversion mode, a single and simultaneous conversion can be initiated by using the single conversion start signal (CONVST). The conversion clock in the single conversion mode is generated internally using a clock oscillator circuit. In the continuous conversion mode, an external clock signal is applied to the CONV_CLK input of the THS10082. The internal clock oscillator is switched off in the continuous conversion mode. The THS10082C is characterized for operation from 0°C to 70°C, and the THS10082I is characterized for operation from 40°C to 85°C.特性Simultaneous Sampling of Two Single-Ended Signals or One Differential Signal Integrated 16-Word FIFO Signal-to-Noise and Distortion Ratio: 59 dB at fI = 2 MHz Differential Nonlinearity Error: ±1 LSB Integral Nonlinearity Error: ±1 LSB Auto-Scan Mode for Two Inputs 3-V or 5-V Digital Interface Compatible Low Power: 216 mW Max 5-V Analog Single Supply Operation Internal Voltage References ...50 PPM/°C and ±5% Accuracy Parallel uC/DSP Interface APPLICATIONS Radar Applications Communications Control Applications High-Speed DSP Front-End Automotive Applications
2009-07-28
2013-01-05
2011-02-06
2010-10-15
2011-11-30
超低失真全差动运算放大器THS770006 3G/4G(LTE)应用快速发展正推动无线基础设施市场不断增长。据iSuppli最新研究数据显示,到2011年全球无线基础设施的资本投资将达403亿美元。而随着工业发达国家的无线运营商
2010-11-01
TI宣布高性能全差动放大器-THS4520TI宣布高性能全差动放大器系列产品又增新成员--THS4520,是可用于驱动高分辨率的高速 ADC的解决方案。这款新型宽频带器件针对高精度 3.3 V 至 5 V 数据采集系统而设计,能够提供轨至轨输出、保持低噪声与最低失真等特性,支持...
2017-12-13
2011-03-21