The HV9918 is a PWM controller IC designed to drive high brightness LEDs using a buck topology. It operates from an input voltage of 4.5 to 40VDC and employs hysteretic control with a high-side current sense resistor to set the constant output current up to 700mA. The device is well suited for applications requiring a wide input voltage range. The high-side current sensing and an integrated current-setting circuitry minimize the number of external components while delivering an accurate average output. Dedicated pulse-width modulation (PWM) input enables pulsed LED dimming over a wide range of brightness levels. A hysteretic control method ensures excellent input supply rejection and fast response during load transients and PWM dimming.The HV9918 offers an analog-controlled PWM dimming feature that reduces the output current by applying an external DC voltage below the internal 2.0V threshold voltage from ADIM to GND. ADIM can also accept input from a resistor divider including a negative temperature coefficient (NTC) thermistor connected between ADIM and GND, or a positive temperature coefficient (PTC) thermistor connected between ADIM and VDD thus providing a PWM thermal-foldback feature that reduces the LED current when the temperature of the LED string exceeds a specified temperature point. Additional features include thermal-shutdown protection.The high switching frequency up to 2.0MHz permits the use of small inductors and capacitors, minimizing space and cost in the overall system. The HV9918 comes in a small 8-Lead DFN package and is ideal for industrial and general lighting applications.
Hysteretic control with high-side current sensing
Integrated 40V 1.0Ω MOSFET
>90% Efficiency
Wide input voltage range: 4.5 to 40V
±5% LED current accuracy
Up to 2.0MHz switching frequency
Adjustable constant LED current
Analog or PWM control signal for PWM dimming
Over-temperature protection
-40ºC to +125ºC operating temperature range
HV9918 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
HV9918K7-G | ATS | HEATSINK40X40X15MMXCUTT766 | 立即购买 |
光博会,又称中国国际光电博览会,深耕行业22载,集聚光电产业优势资源,2020年中国国际光电博览会同期六展覆盖信息通信、数据中心、激光、红外、精密光学、镜头及模组、机器视觉、光电传感等版块,面向光通信、信息处理及存...
大家好,在前两期分别向大家介绍了电装纯正压缩机修理 和喷油器修理技术开发 ,本期将继续带大家了解,为推进碳中和做出积极贡献的混合动力汽车电池修理(以下简称 “HV电池修理” )。 提问环节到 电装
的成本相对传统的CMOS 要高很多。对于一些用途单一的LCD 和LED高压驱动芯片,它们的要求是驱动商压信号,并没有大功率的要求,所以一种基于传统 CMOS 工艺制程技术的低成本的HV-CMOS 工艺
意法半导体推出了 L9918 车规交流发电机稳压器,以更强的功能确保 12V 汽车电气系统稳定。
今日,OPPO Reno3现身GeekBench 4跑分网站。GeekBench信息显示,OPPO Reno3单核得分3193,多核得分9918,配备8GB运行内存,运行基于Android 10的操作系统。
MAX9918/MAX9919/MAX9920为单电源、高精度检流放大器,具有高输入共模范围,可扩展至-20V至+75V
MAX9918, MAX9919, MAX9920 具有较宽共模范围的高边电流检测放大器,汽车应用的理想选择 Maxim最新推出的汽车应用CSA具有-20V至+75V输入共模范围,能够在电感产生反冲、电池
MAX9918, MAX9919, MAX9920 -20V至+75V输入范围、高精度单/双向电流检测放大器 概述 The MAX9918/MAX9919/MAX9920 are single-supply, high-accuracy current-sense ampli
H11G1M | HV20320 | HMC-C051 | HMC-T2220B |
HMC746 | HMC746 | HMC-C039 | HMC-VVD104 |
HMC594LC3B | HMHA2801B | HMC-C079 | HMC739 |
HMC747 | HV264 | HMC1133 | HMC636 |
HMC215 | HMC611LP4 | HMC609LC4 | HMCAD1511 |