CDCE913
具有 2.5V 或 3.3V LVCMOS 输出的可编程 1-PLL VCXO 时钟合成器
制造商:TI
产品信息
描述The CDCE913 and CDCEL913 devices are modular PLL-based, low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230 MHz, using the integrated configurable PLL. The CDCx913 has separate output supply pins, VDDOUT, which is 1.8 V for CDCEL913 and 2.5 V to 3.3 V for CDCE913.The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance. The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the SDA/SCL bus, a 2-wire serial interface. The CDCx913 operates in a 1.8-V environment. It operates in a temperature range of –40°C to 85°C.特性Member of Programmable Clock Generator Family CDCE913/CDCEL913: 1-PLL, 3 Outputs CDCE925/CDCEL925: 2-PLL, 5 Outputs CDCE937/CDCEL937: 3-PLL, 7 Outputs CDCE949/CDCEL949: 4-PLL, 9 Outputs In-System Programmability and EEPROM Serial Programmable Volatile Register Nonvolatile EEPROM to Store Customer SettingsFlexible Input Clocking ConceptExternal Crystal: 8 MHz to 32 MHz On-Chip VCXO: Pull Range ±150 ppm Single-Ended LVCMOS Up to 160 MHzFree Selectable Output Frequency Up to 230 MHzLow-Noise PLL CorePLL Loop Filter Components Integrated Low Period Jitter (Typical 50 ps)Separate Output Supply Pins CDCE913: 3.3 V and 2.5 V CDCEL913: 1.8 VFlexible Clock Driver Three User-Definable Control Inputs [S0/S1/S2], for Example, SSC Selection, Frequency Switching, Output Enable, or Power Down Generates Highly Accurate Clocks for Video, Audio, USB, IEEE1394, RFID, Bluetooth®, WLAN, Ethernet™, and GPS Generates Common Clock Frequencies Used With TI-DaVinci™, OMAP™, DSPs Programmable SSC Modulation Enables 0-PPM Clock Generation1.8-V Device Power SupplyWide Temperature Range: –40°C to 85°CPackaged in TSSOPDevelopment and Programming Kit for Easy PLL Design and Programming (TI Pro-Clock™)APPLICATIONSD-TVs, STBs, IP-STBs, DVD Players, DVD Recorders, and PrintersAll other trademarks are the property of their respective owners
电路图、引脚图和封装图
在线购买
技术资料
BC913 12.6V/13.05V电压可调3A充电ICBC913是一款4V-18V宽电压输入,支持3节锂电池或3节磷酸铁锂电池的降压充电管理IC。集成功率MOS,采用同步开关架构,使其在应用时仅需极少的外围器件, 可有效减少整体方案尺寸,降低BOM成本。BC913具有3A的充电电流能力,充电...
2021-12-13
采用PSD913F2 扩展 8031程序空间8031系列单片机是应用非常广泛的MCU,但是随着控制领域的不断智能化、复杂化,程序长度可能远远大于8031的64KB限制。可以采用PSD913F2作为8031的外部存储器,其程序空间最大可达256KB,用Ke
2009-05-15
2019-08-29
2009-05-15
2009-05-15
2009-05-15
2009-05-15
EP9134 —HDMI分配芯片新亮点
Overview
The EP9134 is a 4-Port DVI/HDMI splitter with integrated HDCP decryption/encryption engines
2009-05-15