The USB2642 is a USB 2.0 compliant, hi-speed huband card reader combo solution. This fully-integrated, single chip solution provides USB expansion and flash media reader/writer integration. The Microchip USB2642 provides an ultra fast interface between a USB host and today’s popular flash media formats. The controller allows read/write capability to flash media including the following:
• Secure DigitalTM (SD)
• SD High CapacityTM (SDHC)
• SD Extended CapacityTM (SDXC)
• MultiMediaCardTM (MMC)
• Embedded MultiMediaCard (eMMC)
The USB2642 offers a versatile, cost-effective and energy-efficient hub controller with 2 downstream USB 2.0 ports and a flash media interface. The flash media interface can support sustained transfer rates exceeding 35 MB/s. Additionally, the USB2642 provides an I2CTM over USB bridge and an SD over USB bridge. The I2C bridge allows for control of any I2C slave device operating at 50KHz serial clock, while the SD bridge supports the use of SDIO cards.
*The service is subject to Microchip'sand requires a myMicrochip account.
Highlights
Ultra-fast Flash media reader/writer with two exposed downstream ports for external peripheral expansion
Optimizes footprint with an approximate 40% board space reduction compared to prior Microchip discrete devices
Reduces power consumption by approximately 30% versus alternative Microchip discrete solutions
Supports MultiMediaCard™ (MMC), Embedded MMC (eMMC) and SD cards
Internal code configurable using an external I2C™ EEPROM; support for external code using an SPI Flash EEPROM
Configurable software architecture supports customization for customer-specific applications and field upgradeable firmware
Ability to place the device away from the main board to deliver USB connectivity where it is needed within the system
RoHS-compliant 7x7mm,48-pin QFN package
Industrial temperature range (-40° to +85°C) options available
Target Applications
Comms Equipment
Servers
Printers
Digital TVs
Monitors
Media Players/Viewers
Gaming Consoles
Digital Photo Frames
Set-top Boxes
USB2642 封装图
USB2642 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
USB2642T-I/ML-SEU | SULLINS | CONN EDGE DUAL FMALE 30POS 0.125 | 立即购买 |
USB2642-I/ML-SEU | Vishay BC Components | 立即购买 | |
USB2642T-I/ML | SiTime | 有源晶振 50MHz ±50ppm 2.5V SMD7050_4P | 立即购买 |
USB2642T/ML | SiTime | 有源晶振 ±35ppm 3.3V 256MHz SMD-6 | 立即购买 |
USB2642/ML | 3M | CONN HEADER VERT 22POS 2.54MM | 立即购买 |
USB2642-I/ML | SiTime | 有源晶振 ±25ppm 2.5V 223MHz SMD-6 | 立即购买 |
随着技术的发展,USB(通用串行总线)接口已经成为连接电子设备的标准。从最初的 USB 1.0 到现在的 USB 4.0,USB 接口经历了多次迭代,以适应不断增长的数据传输速度和电力传输需求
通用串行总线(USB)正迅速成为大部分PC外设的标准接口。由于它具有出色的速度、灵活性,并且支持设备热插拔,因而正在取代RS232和并行打印机端口。工业和医疗设备制造商也非常希望使用这种总线,但苦于没有很好的方式...
USB-C和USB Type-C是同一种标准,用于连接电子设备和传输数据、音频和视频信号。USB-C是USB Type-C的简称,两者可以互换使用。USB-C是USB协会于2014年发布的最新一代
USB On-the-Go (OTG) 允许两个 USB 设备相互通信,而无需个人计算机的服务。尽管 OTG 似乎将“点对点”连接添加到 USB,但事实并非如此。相反,USB OTG 保留了标准
RF-BM-2642QB1I是信驰达基于TI车规蓝牙SoC CC2642R-Q1设计的一款低功耗蓝牙5.2模块, 采用Arm®Cortex®-M4F处理器,具有352 KB Flash和88 KB RAM,工作温度支持-40℃~ 105℃,符合AEC-Q100汽车规格等级2,面向低功耗蓝牙5汽车应用。
TI公司的CC2642R是SimpleLink™ Bluetooth® 5低功耗无线MCU,具有成本效率超低功耗,2.4GHz和亚GHz RF器件,具有非常低的工作RF和微处理器(MCU)电流,以及亚μA睡眠电流和高达80KB奇偶保护的RAM,具有极好电池寿命,允许用小型钮扣电池...
USB2.0航空插头和USB3.0航空插头的主要区别在于数据传输速度和电源输出能力。 USB2.0航空插头的最大传输速度为480Mbps,而USB3.0航空插头的最大传输速度为5Gbps,也就是说
NS1.1S是一个高性能的符合USB 2.0高速4端口USB HUB集线器控制器.4个端口功能可同时工作,低功耗 采用NS1.1S USB2.0 HUB,不仅低成本,用户还可以通过外挂EEPROM,实现多个集线器配置选项. NS1.1S采用主流的SSOP28的封装,可同时实现4个USB口同时工作.
ULN2003 | UPZ2012E121-4R0TF | UC1843-HIREL | UC2842B |
ua741 | UC2844B | USB2230 | UCD90240 |
UCD90320 | USBMULTILINKBDME | UCD90120A | USB2642 |
UCD90160A | UC3845B | UCC3810-DIE | UCD3138 |
USB2601 | UCD9081 | UCC27201A-DIE | USB2227 |