NCP1854

购买收藏

Switching Battery Charger, 2.5 A, with Power Path Management

制造商：ON

中文数据手册

产品信息

The NCP1854 is a fully programmable single cell Lithium-ion switching battery charger optimized for charging from a USB compliant input supply and AC adaptor power source. The device integrates a synchronous PWM controller, power MOSFETs, and the entire charge cycle monitoring including safety features under software supervision. An optional battery FET can be placed between the system and the battery in order to isolate and supply the system. The NCP1854 junction temperature is monitored during charge cycle and both current and voltage can be modified accordingly through I2C setting. The charger activity and status are reported through a dedicated pin to the system. The input pin is protected against overvoltages.

2.5 A Buck Converter with Integrated Pass Devices
Input Current Limiting to Comply to USB Standard
Automatic Charge Current for AC Adaptor Charging
High Accuracy Voltage and Current Regulation
Input Overvoltage Protection up to +28 V
Factory Mode
1000 mA Boosted Supply for USB OTG Peripherals
Reverse Leakage Protection Prevents Battery Discharge
Protected USB Transceiver Supply Switch
Dynamic Power Path with Optional Battery FET
Silicon Temperature Supervision for Optimized Charge Cycle
Safety Timers
Flag Output for Charge Status and Interrupts
I2C Control Bus up to 3.4 MHz

在线购买

型号	制造商	描述	购买
NCP1854FCCT1G	ON	IC BATT CHRGR SW 2.5A 25FLIPCHIP	立即购买

技术资料

标题	类型	大小（KB）	下载
25 PIN FLIP-CHIP,2.55X2.2	PDF	55	点击下载
2.5 A Fully Integrated Li-Ion Switching Battery Charger w PPM and USB OTGS	PDF	616	点击下载

应用案例更多案例

NCP1568的优势介绍及应用
视频简介：在本视频中，您将了解NCP1568的主要优势，并观看演示，使用相应的高速半桥驱动器NCP51530和次级端同步整流器NCP4305。
2019-03-14
NCP3063/NCP363B/NCV3063芯片介绍,ncp3063 introduction
NCP3063/NCP363B/NCV3063芯片介绍,ncp3063 introduction 关键字：NCP3063/NCP363B/NCV3063电源变换芯片介绍
2018-09-21
集成电路NCP5608,NCP5608 introduction
集成电路NCP5608,NCP5608 introduction 关键字：集成电路NCP5608 手机背光＼闪光照明集成电路NCP
2018-09-21
NCP1840芯片资料
NCP1840多通道LED驱动器的应用领域，NCP1840的功能方框图，NCP1840的应用电路以及NCP1840规格说明及资料介绍。
2012-01-04
安森美半导体基于NCP1246和NCP4354低待机能耗电源适配器方案
交流-直流（AC-DC）电源适配器的应用非常广泛，如用于笔记本电脑、液晶显示器及打印机等。这些电源适配器长时间处于空载待机模式，而且使用量巨大，由此带来巨大的电能损耗。美国“能源之星”标准对这类外部电源（EPS）...
2008-10-23
NCP1072/NCP1075电源解决方案的主要特点及应用
在Semi公司的NCP1072 / NCP1075集成了700V MOSFET的固定频率电流模式控制器上，包括软起动，频率开关，短路保护，最大短路电流设置点，斜率补偿，跳频模式，动态自供电源，无负载输入功耗小于50毫瓦，主要用于辅助电源，待机电...
2021-03-14
S1854LBM-5引脚功能的电压资料参数
S1854LBM-5引脚功能的电压资料参数 1 直流取样 1132 输出 &
2008-10-23
如何解释DS1854，DS1857和DS1858温度和电压读
Abstract: The DS1854, DS1857, and DS1858 monitor VCC, ambient temperature, and external analog inputs. This application note explains how to interpret the values stored in the Main Device SRAM and translate them into temperature and voltag
2008-10-23

系列产品索引查看所有产品

NCN6804	NSVF4020SG4	NCP1851	NC7SV05
NCP1216	NB3N551	NCP1653	NUD3112
NCS20062	NC7SV17	NB6L295	NBC12430
NCP339	NCS2564	NCN8024R	NCS36510
NCP347	NCV7702B	NCP51460	NJW0302

元器件商品{{ gnNumber + hkNumber }}