![](/Public/img/home/cart.png)
HV861 is a low noise, dimmable, high voltage, dual EL Lamp driver designed for driving two electroluminescent (EL) Lamps with a combined area of 5.0 square inches. The input supply voltage range is from 2.5V to 4.5V. Enable input logic high can go as low as 1.5V, which allows logic interface operating from typical 1.8V supplies.The device is designed to minimize audible noise emitted by the EL Lamps. The device uses a single inductor and a minimum number of passive components. Using the internal reference voltage, the regulated output voltage is at a nominal value of 90V. The EL Lamps will therefore see ±90V. The two EL Lamps can be turned ON and OFF using two CMOS logic inputs, EN1 and EN2. The driver is disabled when both EN1 and EN2 are at logic low.The HV861 has two internal oscillators, a switching MOSFET, and two high voltage EL Lamp driver H-bridges. Each driver has its own half bridge common output, COM1 and COM2, which significantly minimizes the DC offset seen by the EL Lamp. The frequency for the switching MOSFET is set by an external resistor connected between the RSW-Osc pin and the supply pin VDD. The EL Lamp driver frequency is set by an external resistor connected between the REL-Osc pin and the VDD pin. An external inductor is connected between the LX and VDD pins or VIN for split supply applications. Depending upon the EL Lamp sizes, a 1.0nF to 10.0nF capacitor is connected between the CS and ground. As the switching MOSFET charges the external inductor and discharges it into the capacitor at CS, the voltage at CS will start to increase. Once the voltage at CS reaches a nominal value of 90V, the switching MOSFET is turned OFF to conserve power.EL Lamp dimming can be accomplished by applying a PWM logic signal to the PWM pin. The EL Lamp brightness will be inversely proportional to the PWM duty cycle. The HV861 can also slowly turn the EL Lamp ON/OFF giving a fade ON/OFF appearance.
Adjustable output regulation for dimming
Lamp fade-in/fade-out capability
Low audible noise
180VPP output voltage for higher brightness
1.5V enable input logic high
Single cell lithium ion compatible
One miniature inductor to power both lamps
Separately adjustable lamp and converter frequencies
Split supply capability
16-Lead QFN package
HV861 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
HV861K7-G | ATS | HEATSINK30X30X10MML-TABT766 | 立即购买 |
...方式更自由无界限 2020年10月12日,达尔优(DAREU)发布EK861朱颜双模无线机械键盘,一样的紧凑简约61key键位布局,不一样的个性配色,更强悍的无线连接方案。随时随地享受纯粹的输入,一键提升生产力。 简约,从内到外。 达...
NES模拟器不是ESP32唯一有趣的事情。例如。你可以用它构建一个微型python控制台。您需要更改的唯一组件是从I2C游戏手柄到I2C键盘。我认为使用ATtiny88控制器制作它并不困难。您可以按我的推特查看状态。
CG861XX系列和BQ76930系列都是高效且可靠的方案,它们内部结构都是由三个芯片合封在一起,广泛应用于各种电子设备中。 CG861XX系列和TI的BQ76930系列具有相同的结构,最大支持15
北京时间2020年6月17日,达尔优(DAREU)发布EK861双模机械键盘。 达尔优EK861双模机械键盘采用紧凑且实用的61key键位布局,有线+无线双模连接方式,兼容Windows和Mac等操作系统,可同时在3台设备之间进行跨平台切换。办公与游戏尽在...
目前市场上很多芯片不具备输入过压保护功能,个别芯片的输入过压保护需要外接一串电阻来实现,我们的芯片将输入过压保护功能集成到内部,简化了外围电路配置,降低成本。
高压 LM317HV 系列 IC 将超越 LM317 IC 的传统电压限制,并能够控制可能高达 60V 的电源。
大家好,在前两期分别向大家介绍了电装纯正压缩机修理 和喷油器修理技术开发 ,本期将继续带大家了解,为推进碳中和做出积极贡献的混合动力汽车电池修理(以下简称 “HV电池修理” )。 提问环节到 电装
HMC903-Die | HMC1190A | HMC491 | HMC1019A |
HMC466 | HV9911 | HMC744 | HMC819 |
HMC651 | HMC753 | HMC-C007 | HMC358 |
HMC799 | HV9803B | HMC739 | HMC-C010 |
HMC-C083 | HMC7054 | HMC962 | HMC798A |