HV823 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0V to 9.5V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±90V. The chip can be enabled by connecting the resistors on the RSW-Osc pin and the REL-Osc pin to the VDD pin, and disabled when connected to GND.The HV823 has two internal oscillators, a switching MOSFET and a high-voltage EL lamp driver. The frequency of the switching converter MOSFET is set by an external resistor connected between the RSW-Osc pin and the VDD supply pin. The EL lamp driver frequency is set by an external resistor connected between the REL-Osc pin and the VDD pin. An external inductor is connected between the LX pin and the VDD pin. A 0.01µF to 0.1µF capacitor is connected between the CS pin and the GND. The EL lamp is connected between the VAand VB pins.The switching MOSFET charges the external inductor and discharges it into the CS capacitor. The voltage at CS will start to increase. Once the voltage at CS reaches a nominal value of 90V, the switching MOSFET is turned OFF to conserve power. The output pins VA and VB are configured as an H-bridge and are switched in opposite states to achieve 180V peak-to-peak across the EL lamp.
Processed with HVCMOS®technology
2.0 to 9.5V operating supply voltage
DC to AC conversion
180V peak-to-peak typical output voltage
Large output load capability typically 50nF
Permits the use of high-resistance elastomeric lamp components
Adjustable output lamp frequency to control lamp color, lamp life, and power consumption
Adjustable converter frequency to eliminate harmonics and optimize power consumption
Enable/disable function
Low current draw under no load condition
HV823 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
HV823LG-G | ATS | HEATSINK30X30X10MML-TABT766 | 立即购买 |
高压 LM317HV 系列 IC 将超越 LM317 IC 的传统电压限制,并能够控制可能高达 60V 的电源。
创惟GL823K是一款USB 2.0单LUN读卡器控制器,可支持SD/MMC/MSPRO闪存卡。它支持USB 2.0高速传输,将Digital TM(SD)、SDHC、SDXC、Mini DTM、Micro DTM(T-Flash)、Multi Media Card TM(MMC)、RS Multi Media Card TM(RS MMC)、MMC micro、HS-MMC、MMC mobile、Memor...
介绍了一种基于GPS和电子海图、使用嵌入式Linux操作系统的船舶导航系统,讨论了船舶导航GUI、电子海图数据的预海图显示等关键技术,并给出了解决方案。
...,截至8月19日23时20分,天问一号火星探测器距离地球约823万公里,状态正常。 2020年7月23日12时41分,我国在海南岛东北海岸中国文昌航天发射场,用长征五号遥四运载火箭将我国首次火星探测任务天问一号探测器发射升空,飞...
HY-HV系列可编程高压直流电源一直以来备受用户肯定,也是航裕电源的主营产品。近年来,用户对于高压需求的不断提高,航裕电源今年已交付多台HY-HV可编程高压直流电源,包括120kV、170kV等
目前广泛使用的直流发光二极管(DC LED),若要经由市电供电,须外加交流对直流(AC-DC)整流器,易造成额外物料成本及能源转换损失,因此产业界已发展出以交流电直接驱动的高压LED(HV LED
SQL Server数据库故障: SQL Server附加数据库出现错误823,附加数据库失败。数据库没有备份,无法通过备份恢复数据库。 SQL Server数据库出现823错误的可能原因有:数据库物理页面损坏、数据库物理页面校验值损坏导致无法识别该页面、断电或者文件系统问题导致页面丢失。
N79E823为高速4T 8051单片机系列,其特点为提供工业温度规格,宽电压工作范围 2.7V 至 5.5V、内建ADC、内建Data Flash、欠压检测和在线电路编程(ICP),提供SOP20和DIP20两种选择。 应用领域 : 门禁系统/警报器、温度传感设备、iPod 充电音...
HMC-C053 | HMC311ST89 | HMC654-Die | HMC416 |
HMC451LP3 | HMC546LP2E | HV5623 | HMC-APH478 |
HMC750 | HMC644A | HMC-T2270 | HCPL2531 |
HMC7545 | HMC465-Die | HMC392ALC4 | HMC351 |
HV232 | HMC703 | HMC376 | HMC-C002 |