![](/Public/img/home/cart.png)
The HV513 is a low voltage serial to high voltage parallel converter with 8 high voltage push-pull outputs. This device has been designed to drive small capacitve loads such as piezoelectric transducers. It can also be used in any application requiring multiple high voltage outputs, with medium current source and sink capabilities.The device consists of an 8-bit shift register, 8 latches, and control logic to perform the polarity select and blanking of the outputs. Data is shifted through the shift register on the low to high transition of the clock. A data output buffer is provided for cascading devices. Operation of the shift register is not affected by the LE, BL, POL, or the HI-Z control inputs. Transfer of data from the shift register to the latch occurs when the LE is high. The data in the latch is stored when LE is low. A high-Z (HI-Z) pin is provided to set all the outputs in a high-Z state.All outputs have short circuit protection that detects if the outputs have reached the required output state. If output does not track the required state, then the SHORT pin will be low. This output will pulse low during the output transistion period under normal operation; see SC Timing Diagram for details.All outputs will have a break-before-make circuitry to reduce cross-over current during output state changes.The POL, BL, LE, and HI-Z inputs have an internal pull up resistor.
HVCMOS® technology
Operating output voltage of 250V
Low power level shifting from 5.0 to 250V
Shift register speed 8.0MHz @ VDD = 5.0V
8 latch data outputs
Output polarity and blanking
Output short circuit detect
Output high-Z control
CMOS compatible inputs
HV513 封装图
HV513 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
HV513WG-G | SiTime | 有源晶振 SMD7050_4P | 立即购买 |
HV513K7-G | SiTime | 有源晶振 SMD7050_4P | 立即购买 |
飞兆半导体 (NYSE: FCS) 开发出结合N沟道MOSFET和肖特基二极管的器件FDZ3N513ZT,占位面积仅为1mm x 1mm。 FDZ3N513ZT是升压转换器中的主要元件,用以驱动串联白光LED,为智能电话的显示屏(以及按键,如果有键盘的话)提供照明。
TI推出可提供完整可扩展软硬件的CC430F513x微处理器 日前,德州仪器(TI)宣布推出支持广泛开发商社群、可提供完整可扩展软硬件的CC430F513x微处理器(MCU),进一步推动了单芯
MAX5134, MAX5135, MAX5136, MAX5137 低功耗、四通道、16位,带有输出电压缓冲的DAC
MAX5134, M
MAX5134–MAX5137是具有引脚兼容和软件兼容的16位DAC和12位DAC系列产品。MAX5134/MAX5135为低功耗、4路16/12位、带缓冲的电压输出、高线性度DAC。
2015年7月2日,德国慕尼黑讯HV-ModAL研究项目旨在进一步提高电动汽车动力总成的功率。HV-ModAL希望在今后三年内,打造出一个适用于不同制造商生产的各类电动汽车的电力动力总成模块化系统工具箱。包括英飞凌在内的来自汽车...
富士通半导体推出了用于HV/EV电机控制的32位微控制器MB91580系列,以及用于驾驶辅助显示控制的系统LSI MB86R11。我们不妨来看看两款器件到底有哪些具体功能和特点,又在汽车中发挥怎样
此降压型拓扑结构电路并没有与线电压隔离。 LED 必须在交流电源开启之前就与驱动器相通连。
HMC448LC3B | HMC902-Die | HMC874 | HMC7911 |
HMC-C078 | HMC441LM1 | HMC6787A | HMC952A |
HMC515 | HMC508 | her107 | HMC641ALP4E |
HMC1099 | HMC739 | HMC760 | H11L2M |
HMC848 | HMC397 | HMC386 | HMC1113 |