BQ24133
制造商:TI
产品信息
描述 The bq24133 device is a highly integrated stand-alone Li-Ion and Li-Polymer switched-mode battery charger with two integrated N-channel power MOSFETs. The device offers a constant-frequency synchronous PWM controller with high accuracy regulation of input current, charge current, and voltage. The bq24133 closely monitors the battery pack temperature to allow charge only in a preset temperature window. The bq24133 charges one, two, or three cells (selected by CELL pin) at a fixed 4.2 V/cell.The bq24133 charges the battery in three phases: preconditioning, constant current, and constant voltage. The bq24133 provides power path selector gate driver ACDRV/CMSRC on input NMOS pair ACFET (Q1) and RBFET (Q2), and BATDRV on a battery PMOS device (Q3). When the qualified adapter is present, the system is directly connected to the adapter. Otherwise, the system is connected to the battery. In addition, the power path prevents battery from boosting back to the input. The bq24133 charges the battery from a DC source as high as 17 V, including a car battery. The input overvoltage limit is adjustable through the OVPSET pin. The AVCC, ACP, and ACN pins have a 30-V rating. When a high-voltage DC source is inserted, Q1 and Q2 remain off to avoid high-voltage damage to the system. For 1-cell applications where the battery is not removable, the system can be directly connected to the battery to simplify the power path design and reduce the cost. With this configuration, the battery can automatically supplement the system load if the adapter is overloaded. The bq24133 is available in a 24-pin, 5.5-mm × 3.5-mm thin VQFN package.特性 1.6-MHz Synchronous Switched-Mode Charger With 2.5-A Integrated N-MOSFETs Up to 92% Efficiency 30-V Input Rating With Adjustable Overvoltage Protection4.5-V to 17-V Input Operating Voltage Battery Charge Voltage 1-Cell, 2-Cell, or 3-Cell With 4.2 V/Cell High Integration Automatic Power Path Selector Between Adapter and Battery Dynamic Power Management Integrated 20-V Switching MOSFETs Integrated Bootstrap Diode Internal Digital Soft Start Safety Thermal Regulation Loop Throttles Back Current to Limit TJ = 120°C Thermal Shutdown Battery Thermistor Sense Hot/Cold Charge Suspend and Battery Detect Adjustable Input Overvoltage Protection Cycle-by-Cycle Current Limit Accuracy ±0.5% Charge Voltage Regulation ±5% Charge Current Regulation ±6% Input Current Regulation <15-µA Battery Current With Adapter Removed <1.5-mA Input Current With Adapter Present and Charge Disabled PackageAPPLICATIONSTablet PCs Netbooks and Ultra-Mobile Computers Portable Data Capture Terminals Portable Printers Medical Diagnostics Equipment Battery Bay Chargers Battery Backup SystemsAll other trademarks are the property of their respective owners
电路图、引脚图和封装图
在线购买
技术资料
2019-04-05
TI bq5101x接收器的主要特性及评估板应用分析TI 公司的bq5101x是用于手提设备的无线电源传输的接收器,提供AC/DC电源转换,同时集成了和Qi v1.0通信协议兼容的数字控制,和bq500210发送器控制器一起,能组成完整的无接触电源传输系统,AC/DC的效率93%,最大输入电压20V,主要...
2020-01-16
基于bq24161+TPS2419 双电池供电方案的设计分析本文介绍了基于充电管理芯片bq24161 以及ORing 控制芯片TPS2419 的双电池供电方案的设计,文中分析了双电池供电方案的设计要求,给出了设计框图以及原理图,在此基础上分析了充电管理电路、ORing 电路的具体设计方法,并且详...
2010-11-09
采用BQ24060的锂离子电池充电器设计方案采用BQ24060的锂离子电池充电器设计方案
概述:介绍了TI公司的锂离子电池充电器专用芯片BQ24060的技术特点,详细叙述使用BQ24060芯片设计锂离子电池充电器时热调节保
2010-11-09
2010-11-09
2010-11-09
采用BQ2002的快速充电器原理电路充电开始后,bqZ2根据BAT和TS的输入来判断电池电压和温度是否正常,如果电池电压和温度超出快速充电的条件范围,bq2002将以TM端决定的速率开始涓流充电,反之,就开始进行快速充电
2010-11-09
采用单芯片bq2403x动态电源路径管理充电电路设计由于锂离子电池在重量与容量两方面都具有较高的能量密度,因此广泛应用于便携式设备中。使用智能电话、PDA 及 MP3 播放器等设备的用户希望在无需使用电池的情况下,通过输入电源为设备供电。这就需要一种被称为“电源路...
2010-11-09