Microchip’s dsPIC33E general purpose DSC family features the highest speed 70 MIPS core with excellent performance and code density. It offers superior ADC performance, enhanced CAN communication, CTMU, Op Amps and Peripheral Trigger Generator (PTG) for high-end general purpose applications. These devices are available in various packages and with extended (125°C) temp option.
Operating Conditions3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS
dsPIC33E DSC CoreModified Harvard Architecture
C Compiler Optimized Instruction Set
16-bit Wide Data Path
24-bit Wide Instructions
16x16 Integer Multiply Operations
32/16 and 16/16 Integer Divide Operations
Two 40-bit Accumulators with Rounding and Saturation Options
Single-Cycle Multiply and Accumulate
Single-Cycle shifts for up to 40-bit Data
16x16 Fractional Multiply/Divide Operations
Advanced Analog FeaturesADC module:- Configurable as 10-bit, 1.1 Msps with four S&H or12-bit, 500 ksps with one S&H
Up to three Op amp/Comparators:- Op Amp direct connection to the ADC module- Additional dedicated comparator- Programmable references with 32 voltage points for comparators
Charge Time Measurement Unit (CTMU):- Supports mTouch™ capacitive touch sensing
Timers/Output Compare/Input Capture12 general purpose timers:- Five 16-bit and up to two 32-bit timers/counters- Four OC modules configurable as timers/counters- PTG module with two configurable timers/counters
Four IC modules
Peripheral Trigger Generator (PTG) for scheduling complex sequences
Communication InterfacesTwo UART modules (15 Mbps)
Two 4-wire SPI modules (15 Mbps)
ECAN™ module (1 Mbaud) CAN 2.0B support
Two I2C™ modules (up to 1 Mbaud) with SMBus support
PPS to allow function remap
Programmable Cyclic Redundancy Check (CRC)
Direct Memory Access (DMA)4-channel DMA with user-selectable priority arbitration
UART, SPI, ADC, ECAN, IC, OC, and Timers
DSPIC33EP256GP506 封装图
DSPIC33EP256GP506 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
DSPIC33EP256GP506-H/MR | IDT | ICPCISW24LANE6PORT484BGA | 立即购买 |
DSPIC33EP256GP506T-I/MR | Adesto Technologies | 2MBIT,2X3MMUDFN,1.65-3.6V,T&R | 立即购买 |
DSPIC33EP256GP506T-I/PT | - | - | 立即购买 |
DSPIC33EP256GP506-E/PT | Microchip | AVR AVR® ATmega 微控制器 IC 8 位 20MHz 32KB(16K x 16) 闪存 VQFN32_5X5MM_EP | 立即购买 |
DSPIC33EP256GP506-E/MR | ATS | Heat Sink Assorted (BGA, LGA, CPU, ASIC...) Aluminum Top Mount | 立即购买 |
DSPIC33EP256GP506-I/MR | Desco | MAT DUAL LAYER SKY BLUE 30"X30' | 立即购买 |
dsPIC33CH 系列提供从 28 到 80 引脚的八种封装变体,尺寸小至 5 mm × 5 mm,还提供 64 到 128 KB 的闪存大小。
其旗下品佳推出基于微芯科技(Microchip)dsPIC33CK256MP506芯片的4KW图腾柱PFC数字电源方案。
dsPIC33FJXXXMCX06A / X08A / X10A系列器件支持多种电机控制应用,例如无刷直流电机,单相和三相感应电机以及开关磁阻电机。dsPIC33F电机控制产品也非常适合不间断电源
dsPIC33FJ16MC101 / 102数字信号控制器(DSC)装置。dsPIC33F器件包含具有高性能16位微控制器(MCU)架构的广泛的数字信号处理器(DSP)功能。
Microchip公司的dsPIC33FJ06GS101 / X02和dsPIC33FJ16GSX02 / X04包括了DSP功能和高性能16位MCU架构,在3.0-3.6V时可达40MIPS
三相交错带同步整流的半桥LLC拓扑结构示意如下,需要6对PWM波。对于dsPIC33CK256MP508 可以用PG1、PG3和PG5作为主管PWM驱动,PG2、PG4和PG6作为同步管PWM驱动。
随着嵌入式系统日益复杂以及对高性能的需求也越来越大,Microchip Technology(微芯科技公司)推出了dsPIC33A系列数字信号控制器(DSC)。工程师能够创建复杂的计算密集型嵌入式
图1给出了dsPIC33CH系列MCU主核与从核共享内部合外部振荡器源的框图,也就是说主核和从核共享时钟源,但是振荡器模块是完全独立的。