Microchip’s dsPIC33E family of digital signal controllers (DSCs) features a 70 MIPS dsPIC® DSC core with integrated DSP and enhanced on-chip peripherals. These DSCs enable the design of high-performance, precision motor control systems that are more energy efficient, quieter in operation, have a great range and extended life. They can be used to control brushless DC, permanent magnet synchronous, AC induction and stepper motors. These devices are also ideal for high-performance general purpose applications.
Operating Conditions3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
3.0V to 3.6V, -40ºC to +125ºC, DC to 60 MIPS
dsPIC33E DSC CoreModified Harvard Architecture
C Compiler Optimized Instruction Set
16-bit Wide Data Path
24-bit Wide Instructions
16x16 Integer Multiply Operations
32/16 and 16/16 Integer Divide Operations
Two 40-bit Accumulators with Rounding and Saturation Options
Single-Cycle Multiply and Accumulate
Single-Cycle shifts for up to 40-bit Data
16x16 Fractional Multiply/Divide Operations
High-Speed PWMUp to three PWM pairs with independent timing
Dead time for rising and falling edges
7.14 ns PWM resolution
PWM support for:- Inverters, PFC, Lighting- BLDC, PMSM, ACIM, SRM
Programmable Fault inputs
Flexible trigger configurations for ADC conversions
Advanced Analog FeaturesADC module:- Configurable as 10-bit, 1.1 Msps with four S&H or12-bit, 500 ksps with one S&H
Up to three Op amp/Comparators:- Op Amp direct connection to the ADC module- Additional dedicated comparator- Programmable references with 32 voltage points for comparators
Charge Time Measurement Unit (CTMU):- Supports mTouch™ capacitive touch sensing
Timers/Output Compare/Input Capture12 general purpose timers:- Five 16-bit and up to two 32-bit timers/counters- Four OC modules configurable as timers/counters- PTG module with two configurable timers/counters- 32-bit Quadrature Encoder Interface (QEI) module configurable as a timer/counter
Four IC modules
Peripheral Trigger Generator (PTG) for scheduling complex sequences
Communication InterfacesTwo UART modules (15 Mbps)
Two 4-wire SPI modules (15 Mbps)
Two I2C™ modules (up to 1 Mbaud) with SMBus support
PPS to allow function remap
Programmable Cyclic Redundancy Check (CRC)
Direct Memory Access (DMA)4-channel DMA with user-selectable priority arbitration
UART, SPI, ADC, IC, OC, and Timers
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
DSPIC33EP128MC204 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
DSPIC33EP128MC204T-H/MV | Bourns Inc. | 立即购买 | |
DSPIC33EP128MC204T-E/MV | TE Connectivity AMP Connectors | 立即购买 | |
DSPIC33EP128MC204-H/MV | Bourns Inc. | 立即购买 | |
DSPIC33EP128MC204T-I/MV | SUNTSU | 无源晶振 50Ω 13pF ±30ppm 27.12MHz -20℃~+70℃ SMD3225_4P | 立即购买 |
DSPIC33EP128MC204-E/MV | SUNTSU | 无源晶振 12MHz 100Ω 13pF ±30ppm -20℃~+70℃ SMD3225_4P | 立即购买 |
DSPIC33EP128MC204-I/MV | SUNTSU | 无源晶振 40Ω 48MHz 19pF ±25ppm -30℃~+85℃ SMD3225_4P | 立即购买 |
...本视频介绍了 Microchip 关于马达控制的性能达到 70MIPS 的 dsPIC33EP 系列控制器,以及它相较于上一代 dsPIC33F/dsPIC30F 之间的优化,它是目前 Microchip 最具竞争力的马达控制芯片。
凭借这些特性及其整体的高性能,dsPIC33EP“GS”系列产品适用于广泛的应用领域,涵盖以下应用市场:电脑与电信(如AC / DC和DC/ DC电源)、工业(如太阳能逆变器、LED照明、HID照明、电池充电器、投影仪和电焊机)及汽车(如LED...
...虑到所有这些因素。下面,让我们一起来了解下 Microchip dsPIC33EP ‘GS’ 系列器件如何提升新一代电源应用的环路增益性能。
本视频介绍了Microchip 16位dsPIC33EP “GS”系列芯片,这是Microchip针对数字电源应用专门开发的DSP芯片。
视频简介:本视频介绍了Microchip 16位dsPIC33EP “GS”系列芯片,这是Microchip针对数字电源应用专门开发的DSP芯片。
dsPIC33CH512MP508(MP5)系列对近期推出的dsPIC33CH进行了扩展,将存储器从128 KB增至512 KB,将程序RAM(随机存取存储器)存储容量扩大两倍,由24 KB增至72 KB。
本视频将为大家展示Microchip的读卡器演示。该演示电路板上装有一颗70 MIPS的dsPIC33EP系列处理器,芯片集成了片上放大器、模数转换器(ADC)和定时器接口,适用于移动POS(Mpos)市场。
...Microchip Technology Inc.(美国微芯科技公司)宣布推出全新dsPIC33数字信号控制器(DSC)—— dsPIC33EP512GM710系列,进一步扩展旗下dsPIC® DSC产品组合,为电机控制应用增加了更高集成度。全新DSC系列可利用12个电机控制PWM通道(6对)...