TLC1550
10 位,164kSPS ADC,并行输出、直接 I/F 到 DSP/uProcessor、10 通道
制造商:TI
产品信息
描述The TLC1550x and TLC1551 are data acquisition analog-to-digital converters (ADCs) using a 10-bit, switched-capacitor, successive-approximation network. A high-speed, 3-state parallel port directly interfaces to a digital signal processor (DSP) or microprocessor (µP) system data bus. D0 through D9 are the digital output terminals with D0 being the least significant bit (LSB). Separate power terminals for the analog and digital portions minimize noise pickup in the supply leads. Additionally, the digital power is divided into two parts to separate the lower current logic from the higher current bus drivers. An external clock can be applied to CLKIN to override the internal system clock if desired. The TLC1550I and TLC1551I are characterized for operation from 40°C to 85°C. The TLC1550M is characterized over the full military range of 55°C to 125°C.特性Power Dissipation...40 mW Max Advanced LinEPIC Single-Poly Process Provides Close Capacitor Matching for Better Accuracy Fast Parallel Processing for DSP and µP Interface Either External or Internal Clock Can Be Used Conversion Time...6 µs Total Unadjusted Error...±1 LSB Max CMOS TechnologyAdvanced LinEPIC is a trademark of Texas Instruments.
光纤拉制什么影响1550衰减光纤的拉制对1550nm衰减的影响,从光纤的结构、原材料、工艺等方面进行详细分析。 首先,光纤的基本结构是由纤芯和包层组成的。纤芯是光信号传输的主要区域,而包层则用于保护纤芯和提供反射作用。衰减是指光信号在光纤中传播
2024-04-04
单模光纤1550nm衰减为多少单模光纤是一种传输光信号的重要工具,其起到传输、扩展和调制光信号的作用。1550nm是单模光纤常用的工作波长之一,通过单模光纤传输信号时,会发生一定的衰减。本文将详细讨论单模光纤1550nm波长
2024-04-04
2020-11-10
2020-12-02
Fluke1550C绝缘电阻测试仪功能与优点的介绍Fluke 1550C 数字式绝缘电阻测试仪可提供高达10 kV测试电压的绝缘测试,因此非常适合用于测试各种高压设备,包括开关设备、电机、发电机和电缆。福禄克绝缘测试仪是同类仪器中的最佳产品,可覆盖 IEEE 43-2000 中规定的绝缘测...
2021-03-18
2020-11-06
宝钢1550 冷轧产品牌号命名方法宝钢1550 冷轧产品牌号命名方法
1)冲压用冷连轧钢带牌号命名方法(1)一般冲压用钢BLCB――宝钢(BAOSTEEL)缩写;L――低碳(Low Car
2008-12-24
2018-07-07