MD1715, paired withTC8020, forms a two channel, five level, high voltage, high speed transmit pulser chip set. The chip set is designed for medical ultrasound imaging applications, but can also be used for metal flaw detection, Non-Destructive Testing (NDT), and piezoelectric transducer drivers.The MD1715 is a two channel logic controller circuit with 12 low impedance MOSFET gate drivers. There are two sets of control logic inputs, one each for channels A and B. Each channel consists of three pairs of MOSFET gate drivers. These drivers are designed to match the drive requirements ofTC8020.The TC8020 is the output stage of the pulser, with six pairs of MOSFETs. Each pair consists of a P-channel and an N-channel MOSFET. They are designed to have the same impedance and can provide typical peak currents of ±3.5A at 200V.

  Advanced CMOS technology

  ±4.75 to 12.9V gate drive voltage

  2A output source and sink current

  6.5ns rise and fall time with 1nF load

  10ns propagation delay

  ±2ns matched delay times

  12 matched channels

  1.8V to 3.3V CMOS logic interface

  Smart logic threshold

  Low inductance package