The MCP9803 is a digital temperature sensor capable of reading temperatures from -55°C to +125°C. Temperature data is measured from an integrated temperature sensor and converted to digital word with a user selectable 9 to 12-bit Sigma Delta Analog to Digital Converter.The MCP9803 notifies the host controller when the ambient temperature exceeds a user programmed set point. The ALERT output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the sensor is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device. Address selection inputs allow up to eight MCP9803 sensors to share the same 2-wire bus for multizone monitoring. The MCP9803 also contains SMBus Timeout logic for improved system reliability.Small physical size, low installed cost, and ease of usemake the MCP9803 an ideal choice for implementingsophisticated temperature system management schemes in a variety of applications.

  2-wire I²C™/SMBus Compatible Interface

  SMBus Timeout

  User Selectable 9- to 12-Bit Resolution

  ±1°C Accuracy from -10°C to +85°C

  ±2°C Accuracy from +85°C to +125°C

  Low Operating Current: 220µA (typical)

  Shutdown Mode: 1µA (max)

  Power Saving One-Shot Temperature Conversion Measurement

  Space Saving MSOP & SOIC Packages

  AEC-Q100 Qualified Grade 1