制造商:TI
描述 The LM6211 is a wide bandwidth, low noise op amp with a wide supply voltage range and a low input bias current. The LM6211 operates with a single supply voltage of 5V to 24V, is unity gain stable, has a ground-sensing CMOS input stage, and offers rail-to-rail output swing.The LM6211 is designed to provide optimal performance in high voltage, low noise systems. The LM6211 has a unity gain bandwidth of 20 MHz and an input referred voltage noise density of 5.5 nV/√Hz at 10 kHz. The LM6211 achieves these specifications with a low supply current of only 1 mA. The LM6211 has a low input bias current of 2.3 pA, an output short circuit current of 25 mA and a slew rate of 5.6 V/us. The LM6211 also features a low common-mode input capacitance of 5.5 pF which makes it ideal for use in wide bandwidth and high gain circuits. The LM6211 is well suited for low noise applications that require an op amp with very low input bias currents and a large output voltage swing, like active loop-filters for wide-band PLLs. A low total harmonic distortion, 0.01% at 1 kHz with loads as high as 600Ω, also makes the LM6211 ideal for high fidelity audio and microphone amplifiers.The LM6211 is available in the small SOT-23 package, allowing the user to implement ultra-small and cost effective board layouts.特性(Typical 24V Supply Unless Otherwise Noted) Supply Voltage Range 5V to 24V Input Referred Voltage Noise 5.5 nV/√Hz Unity Gain Bandwidth 20 MHz 1/f Corner Frequency 400 Hz Slew Rate 5.6 V/μs Supply Current 1.05 mA Low Input Capacitance 5.5 pF Temperature Range -40°C to 125°C Total Harmonic Distortion 0.01% @ 1 kHz, 600Ω Output Short Circuit Current 25 mA All trademarks are the property of their respective owners.
(Typical 24V Supply Unless Otherwise Noted)
Supply Voltage Range 5V to 24V
Input Referred Voltage Noise 5.5 nV/√Hz
Unity Gain Bandwidth 20 MHz
1/f Corner Frequency 400 Hz
Slew Rate 5.6 V/μs
Supply Current 1.05 mA
Low Input Capacitance 5.5 pF
Temperature Range -40°C to 125°C
Total Harmonic Distortion 0.01% @ 1 kHz, 600Ω
Output Short Circuit Current 25 mA
LM6211 引脚图
LM6211电路图
LM6211 封装图
LM6211 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
LM6211MF | TI | OP AMP, 1 FUNC, 2500UV OFFSET-MA | 立即购买 |
LM6211MFX/NOPB | TI | LM6211 LOW NOISE, RRO OPERATIONA | 立即购买 |
LM6211MF/NOPB | TI | IC OPAMP GP 20MHZ RRO SOT23-5 | 立即购买 |
- | - | 立即购买 |
ICN6211:MIPI DSI转RGB视频转换芯片方案介绍
随着快充市场的飞速发展和竞争加剧,对整体方案降本的要求更加严苛,为了更好地支持客户提升竞争力与优化性价比,晶丰明源推出了契合市场需求、集成具有IGBT结构的复合功率管快充方案:BP87112&BP6211B,帮助客户在内卷化的竞争中赢得先机。
LT6211UX 是一款高性能 HDMI2.0 至 LVDS 和 MIPI 转换器。 HDMI2.0 输入支持高达 6Gbps 的数据速率,可为4k@60Hz视频提供足够的带宽。此外,数据解密还支持 HDCP2.2。
集创北方,ICN6211-ICN6202 MIPI转RGB,MIPI转LVDS,芯片在MTK,高通,全志,RK方案商已经调试运用量产
龙迅LT6211UX是一款用于VR和Display应用的高性能HDMI2.0到LVDS转换器
生产和科研领域对测试的要求越来越高,所需测试和处理的数据量也越来越巨大,有时需要多个测试仪器同时进行测试,各测试仪器之间又需要进行数据交换;而且测试领域也越来越广泛,有些现场不适合工作人员亲临,这时就...
LM339N是四运放IC,可作信号电压放大,比较,逻辑运放,还用于保护,LM339是四电压比较器 主要用在检测电路和基准电压做比较多用在电磁炉的检测电路等,改变其外围电路的结构与元件参数可作多种用途
National半导体公司推出的轨到轨输出CMOS运算放大器LM6211,它的工作范围高达24V,满足工业和通信应用的低噪音低功耗和低输入偏置的严格要求。
LF356-MIL | LC823450 | LAN9353 | L6563 |
LA5735MC | LM324_XFCS | LM94021-Q1 | LPS22HB |
LIS35DE | LTST-C191KRKT | LC87F5VP6A | LM339A_XFCS |
L7812CV | LSM330 | LC823425 | LB11922 |
LM95172-Q1 | LB1939T | LB1863M | LMH6881 |