![](/Public/img/home/cart.png)
The HV9910B is an open loop, current mode, control LED driver IC. The HV9910B can be programmed to operate in either a constant frequency or constant off-time mode. It includes an 8.0 - 450V linear regulator which allows it to work from a wide range of input voltages without the need for an external low voltage supply. The HV9910B includes a PWM dimming input that can accept an external control signal with a duty ratio of 0 - 100% and a frequency of up to a few kilohertz. It also includes a 0 - 250mV linear dimming input which can be used for linear dimming of the LED current. The HV9910B is ideally suited for buck LED drivers. Since the HV9910B operates in open loop current mode control, the controller achieves good output current regulation without the need for any loop compensation. PWM dimming response is limited only by the rate of rise and fall of the inductor current, enabling very fast rise and fall times. The HV9910B requires only three external components (apart from the power stage) to produce a controlled LED current making it an ideal solution for low cost LED drivers.
Switch mode controller for single switch LED drivers
Enhanced drop-in replacement to the HV9910
Open loop peak current controller
Internal 8.0 to 450V linear regulator
Constant frequency or constant off-time operation
Linear and PWM dimming capability
Requires few external components for operation
HV9910B 封装图
HV9910B 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
HV9910BNG-G-M901 | SiTime | 有源晶振 3.3V ±20ppm 100MHz SMD-6 | 立即购买 |
HV9910BNG-G-M934 | EDAC | 342 SERIES (.100" (2.54MM) CONTA | 立即购买 |
HV9910BNG-G | ATS | HEATSINK30X30X10MML-TABT766 | 立即购买 |
HV9910BLG-G | ATS | HEATSINK40X40X15MMXCUTT766 | 立即购买 |
标题 | 类型 | 大小(KB) | 下载 |
---|---|---|---|
白光LED驱动电路实现方案 | 569 | 点击下载 | |
白光LED驱动电路实现方案 | 511 | 点击下载 | |
HV9931组成的的LED驱动电路 | RAR | 333 | 点击下载 |
富士通半导体推出了用于HV/EV电机控制的32位微控制器MB91580系列,以及用于驾驶辅助显示控制的系统LSI MB86R11。我们不妨来看看两款器件到底有哪些具体功能和特点,又在汽车中发挥怎样
此降压型拓扑结构电路并没有与线电压隔离。 LED 必须在交流电源开启之前就与驱动器相通连。
本文介绍了LT3652HV主要特性, 方框图以及多种应用电路.LT3652HV是Linear公司的完整的单片降压电池充电器,工作电压从4.95V到34V,具
LTM4601HV是一款完整的12A降压型开关模式DC/DC电源,具有板上开关控制器、MOSFET、电感器和所有的支持元件。该Module内置于一个小巧的表面贴装型15mm15mm2.82mmLGA和15mmx15mmx3.42mmBGA封装中。LTM4601HV可在4.5V至28V的输入电压范围内运作,支...
本文介绍HV9963主要特性,功能方框图和典型应用电路。Supertex公司的HV9963是电流模式控制的LED驱动器,能用来控制PWM转换器(降压,升压,升-降压或SEPIC),PWM调光比大于5000:1,
此升压型拓扑结构电路VIN与GND之间可承受130~200V直流电压输入,并提供20到100V LED 输出电压。高端电流检测将LED电流限制在350mA。如果不使用PWM,需要连接VDD来启动LED驱动器。
HV2405E输出电压的设定方式电路
HV2405E的管脚配置和功能示意图
HMC633-Die | HV892 | HMC668 | HMC737 |
HMC1122 | HMC431 | HMC499-Die | HMC6187 |
HMC1099 | HV5622 | HMC-C072 | HMC362-Die |
HV574 | HMC389 | HMC129ALC4 | HMC987 |
HMC600 | HMC409 | HMC920 | HMC7144 |