The HV857L is a low noise, high voltage driver designed for driving Electroluminescent (EL) lamps of up to five square inches. It is the low noise version of the EL lamp driver HV857. The input supply voltage range is from 1.8V to 5.0V. The device uses a single inductor and a minimum number of passive components. The nominal regulated output voltage that is applied to the EL lamp is ±95V. The chip can be enabled/disabled by connecting the resistor on RSW-Osc to VDD/ground. The HV857L has two internal oscillators, a switching MOSFET, and a high voltage EL lamp driver. The frequency for the switching MOSFET is set by an external resistor connected between the RSW-Osc pin and the supply pin, VDD. The EL lamp driver frequency is set by an external resistor connected between the REL-Osc and VDD pins. An external inductor is connected between the LX and VDD pins, or VIN for split supply applications. A 0.003-0.1μF capacitor is connected between CS and ground. The EL lamp is connected between the VA and VB pins. The switching MOSFET charges the external inductor and discharges it into the capacitor at CS. The voltage at CS will start to increase. Once the voltage at CS reaches a nominal value of 95V, the switching MOSFET is turned OFF to conserve power. The outputs VA and VB are configured as an H bridge, and are switching in opposite states to achieve ±95V across the EL lamp.
Audible noise reduction
190 VPP output voltage for higher brightness
Single cell lithium ion compatible
150nA shutdown current
Wide input voltage range 1.8V to 5.0V
Separately adjustable lamp and converter frequencies
Output voltage regulation
Split supply capability
HV857L 封装图
HV857L 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
HV857LMG-G | ATS | HEATSINK25X25X35MML-TABT412 | 立即购买 |
HV857LK7-G | ATS | HEATSINK45X45X20MMXCUTT412 | 立即购买 |
光博会,又称中国国际光电博览会,深耕行业22载,集聚光电产业优势资源,2020年中国国际光电博览会同期六展覆盖信息通信、数据中心、激光、红外、精密光学、镜头及模组、机器视觉、光电传感等版块,面向光通信、信息处理及存...
2015年7月2日,德国慕尼黑讯HV-ModAL研究项目旨在进一步提高电动汽车动力总成的功率。HV-ModAL希望在今后三年内,打造出一个适用于不同制造商生产的各类电动汽车的电力动力总成模块化系统工具箱。包括英飞凌在内的来自汽车...
富士通半导体推出了用于HV/EV电机控制的32位微控制器MB91580系列,以及用于驾驶辅助显示控制的系统LSI MB86R11。我们不妨来看看两款器件到底有哪些具体功能和特点,又在汽车中发挥怎样
此降压型拓扑结构电路并没有与线电压隔离。 LED 必须在交流电源开启之前就与驱动器相通连。
LV/HV P-Well BCD技术能够实现低压 5 V 与高压 100~700 V(或更高)兼容的 BCD 工艺。为了便于高低压 MOS 器件兼容集成,采用源区为硼磷双扩散形成沟道的具有漂移区的偏置栅结构的 HV LDMOS 器件。改变漂移区的长度,宽度,结深度以...
“HV”系列连接器及线束总成是专为汽车应用设计,尤其是基于高电压及高电流设计的混合动力汽车及纯电动汽车;
...一个新的视野,开创了一片新天地。高压LEDs 模组光源(HV LEDs),它的正向工作电压VF 相比LVLED 是高压的,可以人为的在生产时设计控制,HV LEDs 是在同一芯片上的模组,它在生产时已完成PN 结的片上串联,因此整个模组的VF 比...
本视频介绍了PIC12F(HV)752和PIC16F(HV)753的器件特性、功能外设、应用实例,以及针对不同照明需求的解决方案。
HMC792A | HMC194A | HMC7543 | HMC998A-DIE |
HMC-MDB218 | HMC722LP3E | HMC582 | HMC954 |
HMC941ALP4E | HMC373 | HMC650 | HMC430 |
HMC-AUH232 | HMC-MDB169 | HMC-C006 | HMC785 |
HMC940 | HMC3716 | HMC657-Die | HMC653-Die |