For product comparison, please consider:
The EMC6D102 is an environmental monitoring device with automatic fan control capability. This ACPI compliant device provides hardware monitoring for up to five voltages and three thermal zones, measures the speed of up to four fans, and controls the speed of multiple DC fans using Pulse Width Modulator (PWM) outputs.
The EMC6D102 hardware monitor provides analog inputs for monitoring external voltages of +2.5V, +5V, +12V and Vccp. This device has the capability to monitor its own internal VCC power supply, which may be connected to either main power (VCC) or the suspend power well (VTR). In addition to monitoring the processor voltage, VID inputs are available to identify the voltage specification. External components are not required for voltage scaling or similar treatment.
The EMC6D102 hardware monitor includes support for monitoring three thermal zones: two external and one internal. The external temperatures are measured via thermal diode inputs capable of monitoring remote devices. In addition, they are equipped with an ambient temperature sensor for measuring the internal temperature.
Pulse Width Modulators (PWM) control the speed of the fans by varying the output duty cycle of the PWM. Each PWM can be associated with any or all of the thermal zones monitored. As the temperature of the associated zone varies, the PWM duty cycle is adjusted accordingly. The Ramp Rate Control feature controls the rate of change of the PWM output, thereby reducing system noise created by changing the fan speed. The speed of each fan is monitored by a Fan Tachometer input. The measured values are compared to values stored in Limit Registers to detect if a fan has stalled or seized.
Fan speed may be under host software control or automatic. In host control mode, the host software continuously monitors temperature and fan speed registers, makes decisions as to desired fan speed and sets the PWM's to drive the required fan speed. This device offers an interrupt output signal (INT#), which may be used to interrupt the host on out-of-limit temperature or voltage condition enabling an ACPI response as opposed to the host software continuously monitoring status. In auto "zone" mode, the logic continuously monitors the temperature and fan speeds and adjusts speeds without intervention from the host CPU. Fan speed is adjusted according to an algorithm using the temperature measured in the selected zone, the high and low limits set by the user, and the current fan speed.
Features
3.3 Volt Operation (5 Volt Tolerant Input Buffers)
SMBus 2.0 Compliant Interface (Fixed, Not Discoverable) with Three Slave Address Options
Fan Control
PWM (Pulse Width Modulation) Outputs (3)
Fan Tachometer Inputs (4)
Individual Status and Enable Bits Per Tach Input
Programmable Automatic Fan Control Based on Temperature
Fan Ramp Rate Control for Acoustic Noise Reduction
Temperature Monitor
Monitoring of Two Remote Thermal Diodes (+/- 3 Degrees C Accuracy)
Internal Ambient Temperature Measurement
Limit Comparison of All Monitored Values
Individual Status and Enable Bits Per Thermal Input
Interrupt Pin for Out-of-Limit Temperature Indication
Configurable Offset for Internal or External Temperature Channels
Supports Four Programmable Temperature Averaging Modes
Two Monitoring Modes: Continuous or Cycle (Power Saving Mode)
Offers Two Low Power Modes When Monitoring Is Off: Sleep and Shutdown
Voltage Monitor
Monitor Power Supplies (+2.5V, +5V, +12V, Vccp, and VCC)
Individual Status and Enable Bits Per Voltage Input
Limit Comparison of All Monitored Values
Interrupt Pin for Out-of-Limit Voltage Indication
Supports Four Programmable Voltage Averaging Modes
Two Monitoring Modes: Continuous or Cycle (Power Saving Mode)
Offers Two Low Power Modes When Monitoring Is Off: Sleep and Shutdown
5 VID (Voltage Identification Inputs)
XNOR Tree Test Mode
24-pin, SSOP RoHS Compliant package
EMC6D102 封装图
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
EMC6D102-CZC-TR | SII Semiconductor Corporation | Supervisor Push-Pull, Totem Pole 1 Channel SOT-23-5 | 立即购买 |
AEC-Q102验证是最重要的通行证之一。在说明什么是AEC-Q102之前,我们先来看看什么是车规级。车规级是适用于汽车电子元件的规格标准。它实际上是有一套硬件上的标准规
AEC-Q102验证是最重要的通行证之一。在说明什么是AEC-Q102之前,我们先来看看什么是车规级。车规级是适用于汽车电子元件的规格标准。它实际上是有一套硬件上的标准规
EMC测试超标如何整改?|深圳比创达电子EMC
EMC概述(1)——什么是电磁兼容性(EMC)?
EMC概述(3)——什么是电磁兼容性(EMC)?
EMC测试整改:了解EMC测试及解读整改方案?|深圳比创达电子EMC
读懂EMC:详谈EMC!
随着科技的发展,电子市场日新月异,产品更新迭代频繁。中微爱芯在MTP产品“AiP8M102G”的基础上,推出FLASH版本“AiP8F102G”,在家电产品应用中,具有更高的抗干扰性能。
EMI2180 | ESD7462 | ESD5481 | EA2M |
EGP30J | ERJ-3EKF1002V | EMI9404 | EGP30K |
ESD8018 | EMC3DXV5 | ESD7L | ECMF02-4CMX8 |
ESD7002 | EGP20C | ESD7484 | EMC1072 |
EGP10C | ECMF06-6HSM16 | ESD5384 | EMC1212 |