ADS7883
2.7V-5.5V 12 位 3MSPS 串行 ADC
制造商:TI
产品信息
描述The ADS7883 is a 12-bit, 3-MSPS analog-to-digital converter (ADC). The devices include a capacitor based SAR A/D converter with inherent sample and hold. The serial interface in each device iscontrolled by theCSand SCLK signals for glueless connections with microprocessors and DSPs. The input signal is sampled with the falling edge of CS, and SCLK is used for conversion and serial data output. The devicesoperate from awide supply range from 2.7 V to 5.5 V. The low power consumption of the devices make them suitable for battery-powered applications.The devices also includea power saving powerdown feature for when the devices are operated at lower conversion speeds.The high level of the digital input to the device is not limited to device VDD. This means the digital input can go as high as 5.5 V when device supply is 2.7 V. This feature is useful when digital signals are coming from other circuit with different supply levels.Also this relaxes restriction on power up sequencing.The ADS7883 is available in a 6-pin SOT23package and are specified for operation from -40°C to 125°C.特性3-MHz Sample Rate Serial Device 12-Bit ResolutionZero Latency48-MHz Serial Interface Supply Range: 2.7 V to 5.5 V Low Power Dissipation: 6.45 mW at 3-V VDD, 2 MSPS13.5 mw at 5-V VDD, 3 MSPS±0.6 LSB INL, ±0.5 LSB DNL72 dB SINAD, -84 dB THDUnipolar Input Range: 0 V to VDDPower-Down Current: 1 µAWide Input Bandwidth: 30 MHz at 3 dB6-Pin SOT23Package APPLICATIONSBase Band Converters in Radio CommunicationMotor Current/Bus Voltage Sensors in Digital DrivesOptical Networking (DWDM, MEMS Based Switching)Optical SensorsBattery Powered SystemsMedical InstrumentationsHigh-Speed Data Acquisition SystemsHigh-Speed Closed-Loop Systems
2009-06-10
2009-06-10
基于ADS对射频前端的接收端建模与仿真分析近年来,随着无线通信业务的迅速发展,通信频段已经越来越拥挤。1985年美国联邦通信委员会(FCC)授权普通用户可以使用902 MHz,2.4 GHz和5.8 GHz三个工业、科技、医学(ISM)频段。ISM频段为无线通信设备提供了无需申请在低发射功...
2009-06-10
基于ADS1256的直流微弱信号检测系统研究在科学研究中,微弱信号往往是必不可少的,而由于信号的特性及周围噪声可能较大,因此对信号处理电路的要求较高。本文设计了一种用于直流微弱信号检测的电路,对其主要模块电路组成及电气性能进行了介绍。
2009-06-10
2009-06-10
2009-06-10
基于ADS7846实现的液晶显示触摸控制设计在分析液晶触摸屏的工作原理基础上,分析触摸屏专用控制器ADS7846 的工作原理与控制方式。通过ADS7846 与MCU 的SPI 接口,给出AT89S51 的测量子程序流程图,提出触摸屏触点坐标的获得方法
2009-06-10
用ADS7846设计嵌入系统的触摸屏 摘 要: 本文以电阻式触摸屏和触摸屏控制器ADS7846为例介绍触摸屏及其控制器的原理,并以一个应用实例说明如何用触摸屏及其控制器构成嵌入式系统的输入系统。 系
2009-06-10