描述The ADS1222 is a 2-channel, 24-bit, delta-sigma analog-to-digital (A/D) converter. It offers excellent performance and low power in a TSSOP-14 package. The ADS1222 is well-suited for demanding, high-resolution measurements, especially in portable systems and other space-saving and power-constrained applications. A delta-sigma (ΔΣ) modulator and digital filter form the basis of the A/D converter. The analog modulator has a ±5V differential input range. An input multiplexer (mux) is used to select between two separate differential input channels. A buffer can be selected to increase the input impedance of the measurement. A simple, 2-wire serial interface provides all the necessary control. Data retrieval, self-calibration, and Standby mode are handled with a few simple waveforms. When only single conversions are needed, the ADS1222 can be quickly shut down (Standby mode) while idle between measurements to dramatically reduce the overall power consumption. Multiple ADS1222s can be connected together to create a synchronously sampling multichannel measurement system. The ADS1222 is designed to easily connect to microcontrollers, such as the MSP430. The ADS1222 supports 2.7V to 5.5V supplies. Power is typically less than 1mW in 3V operation and less than 1µW during Standby mode.特性240SPS Data Rate with 4MHz Clock 20-Bit Effective Resolution Input Multiplexer with Two Differential Channels Pin-Selectable, High-Impedance Input Buffer ±5V Differential Input Range 0.0003% INL (typ), 0.0015% INL (max) Self-Calibrating Simple 2-Wire Serial Interface On-Chip Temperature Sensor Single Conversions with Standby Mode Low Current Consumption: 300µA Analog Supply: 2.7V to 5.5V APPLICATIONS Hand-Held Instrumentation Portable Medical Equipment Industrial Process Control Weigh ScalesAll trademarks are the property of their respective owners.