ADS1198
用于 ECG/EEG 测量的低噪声、8 通道、16 位模拟前端
制造商:TI
产品信息
描述The ADS1194/6/8 are a family of multichannel, simultaneous sampling, 16-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with a built-in programmable gain amplifier (PGA), internal reference, and an onboard oscillator. With its high levels of integration and exceptional performance,the ADS1194/6/8 family enables the creation of scalable medical instrumentation systems at significantly reduced size, power, and overall cost. The ADS1194/6/8 have a flexible input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and lead-off detection. Additionally, any configuration of input channels can be selected for derivation of the right leg drive (RLD) output signal. The ADS1194/6/8 operate at data rates as high as 8kSPS, thereby allowing the implementation of software pace detection. Lead-off detection can be implemented internal to the device, either with a pull-up/pull-down resistor or an excitation current sink/source. Three integrated amplifiers generate the Wilson Center Terminal (WCT) and the Goldberger terminals (GCT) required for a standard 12-lead medical electrocardiogram (ECG).Multiple ADS1194/6/8 devices can be cascaded in high channel count systems in a daisy-chain configuration. Package options include a tiny 8mm × 8mm, 64-ball BGA and a TQFP-64. Both packages are specified over the temperature range of 0°C to +70°C.特性Eight Low-Noise PGAs and Eight High-Resolution ADCs (ADS1198) Low Power: 0.55mW/channel Input-Referred Noise: 12µVPP (150Hz BW, G = 6) Input Bias Current: 200pA Data Rate: 125SPS to 8kSPS CMRR: –105dB Programmable Gain: 1, 2, 3, 4, 6, 8, or 12 Supports AAMI EC11, EC13, IEC60601-1, IEC60601-2-27, and IEC60601-2-51 Standards Supplies: Unipolar or BipolarAnalog: 2.7V to 5.25V Digital: 1.65V to 3.6V Built-In Right Leg Drive Amplifier, Lead-Off Detection, WCT, Test Signals Pace Detection Channel Select Built-In Oscillator and Reference Flexible Power-Down, Standby Mode SPI™-Compatible Serial Interface Operating Temperature Range: 0°C to +70°C
2020-05-10
2023-11-09
2024-09-13
2019-12-04
2018-07-06
2018-07-06
2018-07-06
2017-12-21