制造商:ADI/AD
优势和特点
Power input voltage range: 2.95 V to 20 V
On-board bias regulator
Minimum output voltage: 0.6 V
0.6 V reference voltage with ±1.0% accuracy
Supports all N-channel MOSFET power stages
Available in 300 kHz, 600 KHz, and 1.0 MHz options
No current-sense resistor required
Power saving mode (PSM) for light loads
Resistor-programmable current-sense gain
Thermal overload protection
Short-circuit protection
Precision enable input
Integrated bootstrap diode for high-side drive
Starts into a precharged load
Small, 10-lead MSOP package
产品详情
The ADP1870/ADP1871 are versatile current-mode, synchronous step-down controllers that provide superior transient response, optimal stability, and current-limit protection by using a constant on-time, pseudo-fixed frequency with a programmable currentlimit, current-control scheme. In addition, these devices offer optimum performance at low duty cycles by utilizing valley current-mode control architecture. This allows the ADP1870/ ADP1871 to drive all N-channel power stages to regulate output voltages as low as 0.6 V.The ADP1871 is the power saving mode (PSM) version of the device and is capable of pulse skipping to maintain output regulation while achieving improved system efficiency at light loads (see the Power Saving Mode (PSM) Version (ADP1871) section for more information).
Available in three frequency options (300 kHz, 600 kHz, and 1.0 MHz, plus the PSM option), the ADP1870/ADP1871 are well suited for a wide range of applications that require a single-input power supply range from 2.95 V to 20 V. Low voltage biasing is supplied via a 5 V internal LDO.
In addition, an internally fixed soft start period is included to limit input in-rush current from the input supply during startup and to provide reverse current protection during soft start for a precharged output. The low-side current-sense, current-gain scheme and integration of a boost diode, along with the PSM/forced pulsewidth modulation (PWM) option, reduce the external part count and improve efficiency.
The ADP1870/ADP1871 operate over the -40°C to +125°C junction temperature range and are available in 10-lead MSOP package.
型号 | 制造商 | 描述 | 购买 |
---|---|---|---|
ADP1871ARMZ-1.0-R7 | - | - | 立即购买 |
ADP1871ARMZ-0.6-R7 | - | - | 立即购买 |
ADP1871ARMZ-0.3-R7 | - | - | 立即购买 |
ADP1871ACPZ-1.0-R7 | - | - | 立即购买 |
ADP1871ACPZ-0.6-R7 | - | - | 立即购买 |
ADP1871ACPZ-0.3-R7 | - | - | 立即购买 |
ADI公司的ADP1047 / ADP1048是具有精确的交流电源计量的数字功率系数修正(PFC)控制器:ADP1047用于单相PFC应用;而ADP1048使用插入式和无桥式PFC应用,使用户具有
ADI新近推出的高性能集成电源管理单元产品家族 ― ADP504x和ADP503x系列。
讲解如何利用LTC1871 升压型开关稳压器的仿真电路来检查开关波形,并观察寄生电感变化时的 PCB 布局。
ADP1712/ADP1713/ADP1714经过优化,使用小型2.2μF陶瓷输出电容器实现稳定运行,在占用最小板空间的同时实现良好的瞬态性能。
ADI推出电流模式同步降压型控制器ADP1870和ADP1871 ADI最新推出两款电流模式同步降压型控制器ADP1870和 ADP1871。这两款同步降压型控制器
ADI推出电流模式同步降压型控制器ADP187x Analog Devices最新推出两款电流模式同步降压型控制器ADP1870 和 ADP1871。这两款同步降压型控制器的输入电源电压范围从2.95V至20V,
恒定导通时间、同步降压型控制器 Analog Devices, Inc.最新推出两款电流模式同步降压型控制器ADP1870 和 ADP1871。这两款同步降压型控制器的输入电源电压
笔者采用现场可编程门阵列(FPGA)设计了ADl871和MCU之间的接口,由FPGA完成对ADl871的控制,并将其输出的串行数据在FPGA的内部变为并行数据,并行后的数据以8位或12位为一组发给MCU。
ADG3233 | ADG1411 | ADAU1445 | ADN2805 |
AD9748 | ADP1716 | AD704 | ADA4807-1 |
AD1895 | AD9523-1 | ADP150 | AD203 |
ADGS1212 | ADT7410 | AD760 | AD5306 |
AT91SAM7S64C-AU | ADP1763 | AD9634 | ADG707 |