ADC0804-N
制造商:TI
产品信息
描述 The ADC0801, ADC0802, ADC0803, ADC0804, and ADC0805 devices are CMOS 8-bit successive approximation converters (ADC) that use a differential potentiometric ladder – similar to the 256R products. These converters are designed to allow operation with the NSC800 and INS8080A derivative control bus with Tri-state output latches directly driving the data bus. These ADCs appear like memory locations or I/O ports to the microprocessor and no interfacing logic is needed.Differential analog voltage inputs allow increasing the common-mode rejection and offsetting the analog zero input voltage value. In addition, the voltage reference input can be adjusted to allow encoding any smaller analog voltage span to the full 8 bits of resolution.特性Compatible With 8080-µP Derivatives – No Interfacing Logic Needed – Access Time 135 ns Easy Interface to All Microprocessors, or Operates as a Stand-Alone Deivce Differential Analog Voltage Inputs Logic Inputs and Outputs Meet Both MOS and TTL Voltage-Level Specifications Works With 2.5-V (LM336) Voltage Reference On-Chip Clock Generator 0-V to 5-V Analog Input Voltage Range With Single 5-V Supply No Zero Adjust Required 0.3-Inch Standard Width 20-Pin DIP Package 20-Pin Molded Chip Carrier or Small Outline Package Operates Ratiometrically or With 5 VDC, 2.5 VDC, or Analog Span Adjusted Voltage Reference Key Specifications Resolution: 8 Bits Total Error: ±1/4 LSB, ±1/2 LSB and ±1 LSB Conversion Time: 100 µs
国产ADC芯片——adc芯片的多种结构随着国内消费电子产品、通信、工业自动化、汽车电子等行业的快速发展,对ADC芯片的需求不断增加,国内ADC芯片近年也在持续稳定地发展着。ADC种类多样,可分为单通道ADC、多通道ADC、高速ADC
2023-10-10
2023-08-16
ADC 失调和 ADC 增益误差规格了解ADC的失调和增益误差规格,如ADC传递函数,并了解ADC失调误差和ADC增益误差的示例。 模数转换器 (ADC) 有很多规格。 根据应用要求,其中一些规范可能比其他规范更重要。 直流规格,如
2023-01-28
基于ADC0804单片集成A/D转换器时序图ADC0804单片集成A/D转换器。它采用CMOS工艺20引脚集成芯片,分辩率为8位,转换时间为100μs,输入电压范围为0~5V。芯片内具有三态输出数据锁存器,可直接接在数据总线上。
2024-02-03
ADC0804模数转换器的应用实例实验要求: 应用A/D转换器将滑动电阻输出的模拟电压量转换为数字电压量,将数字电压量输出到四位数码管,并通过电压表给出模拟电压量的读数。下图是实验截图。
2023-11-16
如何将ADC连接到8051单片机?ADC(模数转换器)是许多单片机开发中非常重要的一部分,本文是关于将ADC连接到8051单片机。ADC0804是此处使用的ADC,在进行接口程序之前,我们必须清楚地了解ADC 0804的工作原理。
2023-07-07
2023-07-07
使用8051的控制直流风扇的温控电路ADC0804是一个8位ADC。对于5V的参考电压,我们将获得5V / 28 = 20mV的分辨率。这意味着,这是ADC IC可识别的传感器模拟值的最小变化。
2020-05-14